|
download The Raptor RP-100 is a Premium replacement lift pump for the Dodge Cummins 24 Valve 5.9L diesel engine. A complete installation kit is included. The Raptor RP-100 flows 100 GPH and is recommended for stock and slightly modified 5.9L Cummins Diesels up to 550+ HP. The Raptor, a gearotor fuel pump, features an adjustable pressure regulator and is also available as the RP-150. The Raptor RP-150 is recommended for highly modified 5.9L Cummins Diesels up to 1,200+ HP
|
|
|
download Chrysler-Dodge Radio Wire Harnesses Note: using an optional snap on wire harness adapter will simplify the wiring. Most snap on wire harness adapters have already converted and color coded the wires from the auto makers in dash wire harness to match typical aftermarket radio wire colors. ** The wire colors listed in the chart above are typical for these vehicles during these years but may not be the exact colors for this vehicle. This is another reason to use a snap on wire harness adapter. ** AS VIEWED FROM MATING END OF CONNECTOR A B C D E F G H I J K L M N Black Plug Gray Plug Typical Dodge/Chrysler Typical New Radio Pin What It Is In Dash Wire Color Equivalent Wire Color A Right Rear Spkr (-) Blue w/ White Stripe Purple w/ Black Stripe B Left Rear Spkr (-) Brown w/ Yellow Stripe Green w/ Black Stripe C Right Front Spkr (+) Purple Gray D Left Front Spkr (+) Dark Green White E Right Rear Spkr (+) Blue w/ Orange Stripe Purple F Left Rear Spkr (+) Brown w/ Blue Stripe Green G Power Antenna/Amp White (use for Infinity Radio) Blue H +12 Volt Battery Wire Pink or Pink w/ White Stripe Yellow I +12 Volt Ignition Wire Red w/ White Strip Red J Radio Dimmer Wire Do Not Use K Headlight Dimmer Wire Do Not Use L Right Front Spkr (-) Blue w/ Red Stripe Gray w/ Black Stripe M Left Front Spkr (-) Brown w/ Red Stripe White w/ Black Stripe N No Wire Metal Braid Or Plastic Connector Attached To Back Of Radio Is The Ground Wire
|
|
|
download Specifications are based on the latest product information available at the time of publication. All dimensions are in inches (millime- ters) unless otherwise noted. All dimensions measured at curb weight with standard tires and wheels. General Information Body-styleCoupe Assembly PlantBrampton, Ontario, Canada EPA Vehicle Class Intermediate Car Introduction DateSRT8 ® — April 2008 as a 2008 model SE and R/T — September 2008 Engine: 3.5-liter High Output SOHC 24-valve V-6 Availability SE Type and Description 60-degree bank angle, liquid-cooled, three-plenum intake mani- fold with electronic short-runner valves Displacement 214.7 cu. in. (3518 cu. cm
|
|
|
|
<< Start < Prev 1 2 3 4 5 6 Next > End >>
|
| Results 1 - 7 of 42 |
