TRUMPET INSTALLATION The new trumpets will mount where the existing horn is mounted. Remove the old horn, use star washer, then horn assembly, then star washer, then acorn nut. Level the air horns then tighten acorn nut. Insure that the front of trumpets do not touch engine. If they do, bend air horn mounting bracket outward slightly until they clear (about 3/8")

COMPRESSOR INSTALLATION The compressor will mount behind the right front fork area behind the headlight. Remove top bolt from chrome cover, then remove brake line bolt under triple tree, Pull back chrome cover. Use two (2) zip ties and mount compressor to fork, compressor outlet facing up. The air hose routes from the air horns thru to the left hand side of front fork, over behind the headlight to the right had side where the compressor is mounted. Do not cut hose until you connect it to the compressor.