download

HONDA TRX 400EX 99-07 Low mount stabilizer installation guide: 1. Identify all of the parts in the kit and their relative mounting locations by viewing all the photos with this kit. 2. All the 6mm bolts in this kit should be tightened to 6-8 ft. lbs., and have blue Loc-tite on the threads. 3. Raise the front end of the quad so the front wheels are off the ground slightly, use a center stand or wood blocks. 4. Alignment is critical, so that you don’t damage the stabilizer by over extending the linkarm past its intended travel. 5. The assembly sequence is important in order for all the parts to physically fit in the frame due to close tolerances. 6. First, install the stabilizer itself to the riser block #20-7200-01 using (2) 6x20mm Allen bolts. 7. Next, install the riser block & stabilizer to the upper frame plate (#20-0760-00A) using (2) 6x20 Allens