download

Step 1 - Unpack QuickLIFT kit and verify contents. Step 2 - Gather the required tools. Step 3 - Mark driver's side hood bracket location. This manual is property of Redline Tuning LLC. Any unauthorized duplication or use without written permission from Redline Tuning LLC,violates Copyright laws. Copyright © 2003 Redline Tuning LLC. All Rights Reserved. 1 Manual Rev. 1.01 2/18/06 Remove all items from the packing tube. You should have the following before beginning: * (2) Gas Charged Springs (RT-QL-200-A5A) * (4) 3/16" multi-grip rivets - used on hood brackets * (4) Self tapping high strength screws - used on fender brackets * (4) Fender & Hood Steel brackets (large brackets are for fenders) * Full-color printed instructions * Gas Spring locking clips (already installed on the gas spring ball end